Michael Worthington
|
3/30/2020 12:11 PM
|
Member Dick Powers contacted me with new information about the pin and roller sets made by Egge. In the 1998 Egge catalog the roller sets have a stock number of VC109 which fits all the Model L through to 1933 KB. So they fit all the engines that are fork and blade construction.
I am still looking for more members to join this order. So far I have orders for 13 sets but need 16 for the minimum order at Egge. Anybody else thinking of doing engine work in the near future?
|
|
|
Michael Worthington
|
3/28/2020 8:00 AM
|
Thanks George!
That makes 13 sets ordered. I need 3 more set before we can get these made.
Anybody!
|
|
|
George Whelan
|
3/27/2020 5:16 PM
|
Michael I would be interested in purchasing a set of rollers & pins as well. Can you put me on the list Thanks George Whelan
|
|
|
Michael Worthington
|
3/4/2020 5:19 PM
|
So Egge has come back and says that I need 16 sets ordered (256 pins and 256 rollers) before they will make them. They will cost $20.63 per a set of one pin and one roller. So enough to do one engine rebuild will be $330.08 (16 sets)
So far I have had interesting in ordering 12 sets from people in the club.
These will fit all the Model L years.
|
|
|
Michael Worthington
|
2/26/2020 3:42 PM
|
So the guy I was dealing with, has retired and nobody else seems to know about the order. Also there is a question as to whether they need more than 10 set ordered to be able to go ahead making them. As I find out more info I will pass it on.
They last made them in 2003 and they do not have any left in stock.
I am getting my engine ready to go to the machine shop and really could have done with these being made by now.
|
|
|
Michael Worthington
|
7/19/2019 7:25 AM
|
Hi Bob,
I will add you to the list.
Thanks
|
|
|
Bob Acquistapace
|
7/18/2019 12:07 AM
|
You can put me in for a set of ROLLER and PINES. Thanks for bird dogging this. Bob Acquistapace
|
|
|
Michael Worthington
|
7/16/2019 12:40 PM
|
I have spoken to Egge again they are saying that if we get around 10 sets ordered they would remake them. The approximate price would be around $20 per roller and pin so around $320 a set plus postage and packing.
Please let me know if you are interested.
Best, Mick
|
|
|
Francis Spinale
|
6/14/2019 9:14 AM
|
I would put a set on the shelf as well. But depends on $$
|
|
|
Bill Wybenga
|
6/5/2019 9:05 PM
|
I've just re-assembled my engine with the old, slightly pitted ones but would order a set as spares if the price is reasonable. Bill W.
|
|
|
Michael Worthington
|
5/20/2019 10:17 AM
|
That's great anybody else?
|
|
|
Michael Riley
|
5/19/2019 1:47 PM
|
I would be interested in a set or 2 of the rollers. Michael Riley 713-992-1086
|
|
|
Michael Worthington
|
4/18/2019 8:28 PM
|
I have been talking to Egge about making a batch of cam rollers and pins. They used to make them but they are now out of stock.
I am wondering how may of you would be interested in buys them if I can get them to make them?
Mick
|
|
|